Pre-Made KA1 Tiger Coils (26 AWG + 0.2mm x 0.8mm) 0.36 Ω – 10 Pack

£5.99

26 in stock

Add to Wishlist

Description

Pre-Made KA1 Tiger Coils

The Pre-Made KA1 Tiger Coils offer a balance of convenience and performance for enthusiasts requiring quality heating elements. These coils feature 26 AWG KA1 wire with a 0.2mm x 0.8mm flat wire wrap so it results in a stable resistance of 0.36 ohm, suitable for a wide range of electronic devices. Throughout their product line, they are known for their tiger coil designs that enhance the vaporisation of e-liquid. This results in clean and dense clouds. In packs of ten, these coils ensure longevity and ease of use, eliminating the need for manual coil construction. In terms of reliability and quality, the KA1 Tiger Coils are an excellent choice for users who demand a minimal amount of effort.

About The Product

The details of this product are as follows:

  • Metal – FeCrAl A1 ( KA1)
  • Pack Size – 10 Coils
  • Resistance – 0.36 Ω
  • Coil Build – Tiger Coils (26 AWG + 0.2mm x 0.8mm)

Why Use The Crazy Wire Company

  1. Quality of products: The Crazy Wire Company always  offer high-quality products that meet industry standards and customer expectations.
  2. Selection: We offer a wide variety of wire products and sizes to meet the diverse needs of our customers. We have more than 600 products available through our site and counting. 
  3. Price: We always offer the best value possible. Our wires are available as part of our major weaving processes, so it is bought at the best possible rate. 
  4. Availability: Our products are kept in house and are ready to ship immediately. 
  5. Customer service: Our experienced staff help our customers feel confident in their purchases and provide assistance when required. 

What Else Is Available?

We do not only offer KA1 round wire. We also have a huge range of Nichrome and stainless steel round wire in immediate stock too.

Ribbon wire and flat wire are stocked for immediate dispatch too.

 


FAQs About This Product

What Is The Best Way To Clean KA1 Tiger Coils?

In order to clean KA1 Tiger Coils, you should gently dry burn them at a low wattage, allowing any residue on the coils to burn off. Remove any remaining particles from the coils by lightly brushing them with a coil cleaning tool or a small, soft-bristled brush after they have cooled. It’s important to avoid using water or liquid for cleaning the coils, since this could damage them. If you are going to reuse the coils after cleaning them, make sure you thoroughly dry them and they’re free of debris. By regularly cleaning the coils, you will extend their life and maintain their performance.

How Do I Properly Install KA1 Tiger Coils?

  1. Turn Off Device: Turn off or lock your electronic device to prevent accidental firing.
  2. Access Deck: Open the build deck of your device.
  3. Loosen Terminals: Unscrew the terminal screws enough to insert the ends of the coil.
  4. Insert Coil: Carefully insert the ends of the KA1 Tiger Coil into the open terminals.
  5. Secure Coil: Tighten the terminal screws to secure the coil in place, ensuring it’s firmly held but without over-tightening as this can damage the coil.
  6. Position Coil: Adjust the coil’s position as needed so it’s in the centre and not touching any part of the build deck to prevent shorts.
  7. Trim Excess Leads: Use wire cutters to trim the excess leads as close to the post as possible to prevent shorts.
  8. Check Resistance: Use an ohmmeter or the resistance checking function on your device to ensure the coil is at the expected resistance (0.36 Ω for KA1 Tiger Coils).
  9. Dry Burn: Gently pulse the power to your coil to check for even heating and to remove any manufacturing residues. The coil should glow from the inside out; if it doesn’t, adjust the positioning and check for hot spots that can be worked out by lightly strumming the coil with a ceramic tweezer.
  10. Cool Down: Allow the coil to cool down completely before proceeding.
  11. Wicking: Insert the appropriate amount of cotton or your chosen wicking material through the coil. The wick should be snug but not so tight that it deforms the coil when pulled through.
  12. Prime Coil: Saturating the wick with your chosen liquid will ensure that the coil is full coverage with prime.
  13. Reassemble Device: Put your device back together, following its specific instructions.
  14. Test Fire: Before using, do a final test fire to ensure everything is working correctly.

 


Check out our blog expanding on the difference between Clapton and Flapton coil wires. This is an extremely detailed article, which we hope will provide much insight into the subject. 

We also offer similar products through our highly popular eBay store, check us out there too.

Contact our team today if you have any questions at all. We are always really keen to help in any way that we can.

Reviews

There are no reviews yet.

Be the first to review “Pre-Made KA1 Tiger Coils (26 AWG + 0.2mm x 0.8mm) 0.36 Ω – 10 Pack”

Your email address will not be published. Required fields are marked *